XQ-2B Gold Phase Sample Inlay Machine

This machine is used for grinding before throwing, for small, not easy to hold or irregular metallographic, rock phase sample inlay. After the inlay, it is easy to grind the sample. It is also beneficial to view the material organization under a gold microscope; test the hardness on the hardness meter.

Product Presentation

This machine is used for grinding before throwing, for small, not easy to hold or irregular metallographic, rock phase sample inlay. After the inlay, it is easy to grind the sample. It is also beneficial to view the material organization under a gold microscope; test the hardness on the hardness meter.

The machine can work reliably under the following conditions:

  1. The altitude is not higher than 1000m.
  2. The surrounding medium temperature shall not be higher than + 40℃ and not less than-10℃.
  3. The air relative humidity is not greater than 85% (at 20℃).
  4. There is no conductive dust, explosive gas, and corrosive gases that seriously damage metals and insulators.
  5. No obvious vibrations and bumps.
Technical Specifications

Sample Pressing Diameter: Φ 22, Φ 30, Φ 45mm (choose one of three when ordering)

Temperature Control Range: 0-300℃

Net Weight: 33kg

Timing Range: 0-30min

Heater: AC 220V / 50Hz / 400W

External Size: 400mm 290mm 400mm

Accessory Box Standard

Host: one unit

Power Cord: one root

Embedding Material：one pack (500g)

Technical Documents: manual, certificate, warranty card -one of each

Actual configuration may vary based on custom requirements.